Porcelain / Sintered Stone Honeycomb Panels

KCP’s porcelain / sintered stone honeycomb panels consist of 3~10mm natural porcelain / sintered stone tile on top and aluminum honeycomb panels as backing for reinforcement.

As technology advances, the porcelain slabs can now be as large as 1600*3200mm per piece, with minimum thickness of 3mm. A great variety of patterns can be printed on to the slabs, including stone pattern, wood vein, pure color, customized texture, etc. However the big size with minimum thickness makes the porcelain tile comparatively more fragile and difficult to install – Therefore aluminum honeycomb solution is the best implement for such applications.

The porcelain slab is bonded with the backing by specifically developed epoxy adhesive. With reinforcement of the honeycomb backing, the panel as a whole can be transported / installed easily. Interlocking systems can be embedded onto the honeycomb backing, which significantly cutting down the installation time and budget.

KCP works closely with internationally renowned adhesive brands to ensure that the glue applied on each individual porcelain honeycomb panel fits for the use in even the most extreme conditions. For example, our porcelain honeycomb panel can endure vast temperature changes from -40 degree to 80 degree Celsius while the bonding strength stays at excellent level after decades.

 

 

Key specs: 

Top veneer: Porcelain tile / Sintered stone slab

Backing: Aluminum honeycomb panels or fiberglass honeycomb panels

Pattern: Stone pattern, wood vein, pure color, customized texture, etc.

Dimension: 1600*3200mm, or larger depends on slab sizes

Overall thickness: 10~100mm

Factory pre-fabrication: Possible

]]